WARNING:This product contains nicotine.

Nicotine is an addictive chemical.

FAQ

FAQ

  • What should I do if the cartridge is easily damaged while filling?

    What should I do if the cartridge is easily damaged while filling?

    Pull out the cartridge before opening the rubber stoper!

  • What should I do if the cartridges are not tight?

    What should I do if the cartridges are not tight?

    It may be that the coil is not inserted correctly. When inserting the coil, the two ends of the coil should be aligned with the top and bottom of the cartridge.

  • What can I do if I cannot use 4.8V mod with 0.5Ω coil?

    What can I do if I cannot use 4.8V mod with 0.5Ω coil?

    The 0.5Ω coil can support 3.3V& 3.8V, does not support 4.8V, only when the coil resistance is above 0.5Ω can support all three voltages.

  • What is the best wire? What is the best diameter?

    What is the best wire? What is the best diameter?

    Recommended wire specification: 28ga 30ga Recommended wire diameter: Ø2.0 Maximum diameter: Ø2.5 (when diameter is 2.5, the thickest wire can only be 26ga)

  • What should I do if the 0.5ohm mesh coil does not support the bypass mode?

    What should I do if the 0.5ohm mesh coil does not support the bypass mode?

    When using a 0.5 ohm mesh coil, only constant voltage mode can be used. It can only use the constant voltage 3.3v (purple light) or 3.7v (blue light) if the coil resistance is 0.5ohm.

  • What's the recommended coil resistance and power?

    What's the recommended coil resistance and power?

    Recommended 0.8-1.2 ohm coil; Recommended power range: 14w-22w.

facebook twitter instagram email
Copyright © 2019 VapeFly.com. All Right Reserved.